exchange the time capsula
Step 1: Push gently with your fingers on the glass of the Time Capsula
Step 2: The Time Capsula will drop out
Step 3: Chose the Time Capsula of choice
Step 4: Push gently from below with your fingers the chosen Time Capsula into the outer case
IMPORTANT: Align the slot of the outer case with the crown of the Time Capsula
Step 5: Now you are ready
Adjusting time
Position 1: Watch is running (normal position)
Position 2: Setting the time (watch stopped)
Step 1: Pull the crown out to Position 2 (watch stops)
Step 2: Turn crown clockwise to set desired time
Step 3: Push the crown back to Position 1
Step 4: The watch is all set
IMPORTANT: After every operation, the crown must be pushed to position 1
exchaning strap
To do this, you must hold the head of the watch (face down) in one hand while the bottom of the strap is facing you in the other hand.
Step 1: To remove your strap, pull the pin to the side and remove the strap from the fasteners
Step 2: To attach your strap, align the pins with the holes in the pins and click the strap to place it
Adjusting Metal strap
Step 1: Lift the locking part with the strap tool (a small screwdriver is sufficient)
Step 2: Slide the buckle along the strap to adjust the size. The back strap has cavities for different buckle options
Step 3: When the correct size is set, push the locking piece down
The HK-Watch BOx
1st Layer : Space for up to four additional Time Capsulas (layer can be removed)
2nd Layer: Space for the 2 Year International Warranty Card, cleaning cloth as well as additional watch cases, watch straps,
and/or further Time Capsulas
3rd Layer: Watch pillow for one HERMANN KOBLER WATCH
IMPORTANT: Read the General Instruction carefully. Make sure when you exchange the Time Capsula that you push gently and without any force as well as do it above a table or some sort. This comes as the Time Capsula shall not fall from a high distance to the ground as this may cause damage to your movement, glass, or the Time Capsula in general.
